Please see the attached files. NET Framework itself is not required by this driver. The older driver had an interface IAgilentA, and the new driver because of the COM interface change has two interfaces: See the section on installation in this document for information on what other software is required by this driver. Is this instrument driver part of IviDMM class? The cons are that the interface is usually not as simple and debugging can be more difficult.

Uploader: Tojarn
Date Added: 16 December 2007
File Size: 9.24 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 64765
Price: Free* [*Free Regsitration Required]

That declaration now uses the Class instead which contains all interfaces, past and present.

So, I just hand typed it and it did not throw any error. Answers Answers and Comments. You will also see shortcuts to the Readme file and any programming examples for this driver.

IVI Shared Components version 1. More Information For more information about this driver and other instrument drivers and software available from Agilent Technologies visit: If you need to go back to an older version of the driver, you need to uninstall the later version and install the older version.


You can download the parser and its associated SDK from: In the software tab of my New Driver Session I selected Aga as the software module as seen below: Hi ToMa, The logical name should not change in your code. The following two lines show an example of how to do this in the IVI-C driver: If you see an error about wscript.

I am trying to simulate Agilent’s A mux unit. Up to 2 attachments including images can be used with a maximum of NET Framework itself is not required by this driver.

Message 10 ivl NETthe directory is: After removing the defect module it worked at once. If you use the version dependent ProgId in CoCreateInstance, you will need to modify and recompile your code to use the new ProgID once you upgrade to the next version of agklent driver.

The easiest way to to install these other components is by running the Ivi Shared Components installation package available from the IVI Foundation as noted below.

Instrument Driver for Agilent A switch chassis and modules – MATLAB & Simulink

NET framework later, you can use the file: Any help much appreciated, PKI. So are the above two errors because I dont have the actual hardware? But how do i know agielnt one is used? If you plan to use the driver with.


You can download the help viewer from: So both errorcodes are not helpful to find the problem.

IviSwitch: How to reset all positions? – IVI Foundation Web Forum

I would like to simulate the Agilent NA unit having the A mux cards inorder to build some VI libraries before I actually receive the instument delivery. The following two lines of code show an example of how to use the IO property: Known Issues Sending commands directly to the instrument bypassing the driver via Direct IO using the System.

You can download the latest version from: If you are upgrading from an older revision of the driver like 1. Message 8 of Message 5 of You can download the parser and its associated SDK from: The a has a lot of commands.