Tech support scams are an industry-wide issue where scammers attempt to trick you into paying for unnecessary technical support services. Mac Loopback Test except, the data is routed back via physical layer device. Drivers have to be installed against the device. Rebooted again, still wouldn’t work. Please turn JavaScript back on and reload this page.

Uploader: Gataxe
Date Added: 24 September 2017
File Size: 66.62 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 85425
Price: Free* [*Free Regsitration Required]

This test verifies the access integrity of the PCI configuration registers. It enables an 570s and waits ms for the interrupt to occur and reports an error if it cannot generate the interrupt.

DOS Diagnostic User’s Guide

This document provides the information on how to use the DOS diagnostic utilities program on Broadcom x Gigabit Integrated Controllerin particular BCM and its related components.

This content has been marked as final. These are the functionalities of the phy. It saves the content broavcom VPD first before perform the test. This test writes test data to the SRAM and reads it back to ensure that the data is correct.


The function is identical to A2. The test writes and reads back the data for the entire test range, and then restores the original contents of the VPD memory. This test sets the reset bit and polls for self-clearing bits.


In reply to Danny Van Houdt’s post on August 19, From everything else on your host, this address is NOT accessible Hope this information was helpful and do let us know if you need further assistance.

Vos default, an incremental data pattern is used. Selects the specific Dis protocol. NIC still wouldn’t start. This thread is locked. They are described below. Follow the on-screen instructions to complete it and the restart the computer if prompted.

HiThank you for posting your query on Microsoft Community. Continue to count up to times.

Broadcom 57XX Gigabit Integrated Controller Free Driver Download

This test performs in the same way as the Scratch Pad Test described in B1. Please read all restrictions and disclaimers. It initializes the medium access control MAC into an internal loopback mode and transmits packets.


This test tests the message signal interrupt MSI capability of the adapter. Only related errors in Event Log were network e.

Write complement test data into next address. These are functions of the PHY.

In CLI, assuming there are three devices in the system, all device information always displays before each prompt as seen in the following example:. I am new to installing and configuring the device drivers in Bdoadcom. This test uses an indirect addressing method to write an increment of data to the MAC hash register table and read back data for verification.

Did this solve your problem? This is external loopback test. The default files names are asfinit.

But i want to know how to ping these two connection from my Dos virtual machine. The 8 test patterns are described below.