The Internet light should be flashing green. Did the outlet get tripped? IF you want to get into the modem, then yes, bypass the router temporarily and set an IP address within the appropriate range on your computer eg. If you have a Comtrend and you need to bypass your router to troubleshoot your connection, you will need to create a broadband connection on your computer. If your wall jack has an upper and lower port, typically the lower port is for DSL, unless otherwise labeled. If you need help doing that on the router: On the other hand if you need access to both..

Uploader: Molkis
Date Added: 25 August 2018
File Size: 32.27 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 23464
Price: Free* [*Free Regsitration Required]

Some customers choose to bridge the modem and put the PPPoE on the router due to having additional networking devices.

What should the DSL modem lights look like? (Mount Horeb & Blue Mounds)

The LAN Link light should be flashing green. Resetting the modem will wipe out all provisioning needed for connecting to our service.

Otherwise – yeah, it’s basically invisible and you can’t reach it via IP. Wait a couple minutes then try your connection again. Tech Support – Mount Horeb, Blue Mounds and Verona customers should bring their modem, along with the power cord, to the Mount Horeb business office for testing.


Search Support Search for: I understand the Comtrend IP address is If the network cable is plugged in correctly make sure your network card is enabled on your computer. I also use a router with a gateway address of Are we seeing the end of the road for the Windows NT kernel? How can I access Comtrends settings?.

Should I remove the router to make it simpler? Please verify the cables are all plugged in securely and then contact MHTC Technical Support for assistance in troubleshooting the modem. You shouldn’t need to reset the Comtrend at all. For Dodgeville customers, please click here. Power-cycling the modem is ok however.

Comtrend Adsl2 DSL Modem Ethernet Router Model Ctt | eBay

Did the outlet get tripped? Dodgeville North Iowa Street – Or just set DNS on the computer, that’s an option too. Most Active Forum Topics this week Check to see if the outlet is getting power by plugging something else into it.

Power off the modem and router and wait 2 minutes. For us helpers to better help you, it would help to know the OS and Version.

Comtrend Adsl2 DSL Modem Ethernet Router Model Ct-5072t

It is accessible via IP if, and only if, clmtrend hardcode the IP information on the computer eg. The details would be different for non-Debian derived distributions.


I say IF because you typically don’t need to get into the Comtrend, especially if you have a router. Comtren the OP started the thread. So what do I need to do to change my IP addressmanually to that of the modem?

Is the telephone line also plugged in securely at the wall jack?

If you only have Internet service on the modem, typically, a network cable can be plugged into any of the four ports comhrend thru 4x. Was there some reason specifically that you wanted to log in?

For example I have the Linksys E hardware version one, running one of the mods of the original tomato firmware for example Toastman or Shibby. I also use a Linux OS. If the Internet light ct-5027t red, the modem could be failing or has lost its provisioning.