JETPRINTER 2050 DRIVER

Don’t have an account? Power Service Check Action Power Supply Disconnect J11 from the system board and check the following voltages on the power supply cable Using a small screwdriver, break the four prongs off the compound idler gear and remove the idler gear. Position the left edge of the printhead carrier at the center of the second exit roller from the left. Dual printheads provide color and true black printing without changing printheads. When working on the printer, always unplug the printer from the wall outlet. Remove the paper load door and manual insert tray.

Uploader: Zoloran
Date Added: 26 June 2007
File Size: 15.49 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 15563
Price: Free* [*Free Regsitration Required]

Jetprintfr sure the envelope guides are against the envelopes. Pull up the right side of the mid frame assembly and pull forward and remove the maintenance station assembly.

Remove the carrier frame assembly. Frames Page 61 Page 62 – Assembly 3: Remove the front cover.

Genuine Lexmark Black Ink Cartridge for Color Jetprinter | eBay

Repair Information This chapter explains how to make adjustments to the printer and how to remove defective parts. Parts Catalog X, 30X 7. To reassemble, place the cover over the tabs in the bottom cover and press down until the cover latches. Don’t show me this message again.

  INTEL ICH8M ULTRA ATA STORAGE CONTROLLER DRIVER DOWNLOAD

Jetprintfr Aids X, 30X 3. Carrier Transport X, 30X Assembly 6: Carrier Transport Page 71 Page 72 – Assembly 7: Test Page The test page will contain the following: Remove the paper load door and manual insert tray.

LEXMARK COLOR JETPRINTER SERVICE MANUAL Pdf Download.

This manual also for: Page 5 X, 30X Preventive Maintenance Slide the cover forward and off the printer. Printhead Carrier Reseat the printhead cables in jetprrinter system board Assembly and check the following parts for wear or damage: Unlatch the left side of the exit roller shaft and work the belt off the exit roller pulley.

Preventive Maintenance This chapter contains the lubrication specifications. Be careful not to break the locking tabs [A]. General Information X, 30X 1.

Frames X, 30X Assembly 2: Remove the retainer from the right end of the carrier guide rod. Page 4 X, 30X Repair Information Page 50 X, 30X Note: Special tools and test equipment are listed in this chapter, as well as general environmental and safety instructions.

  DELL LATITUDE D510 VISTA AUDIO DRIVER

Lexmark Color Jetprinter 2050 Service Manual

Gently pry the Code Module from the system board noting the position of the notch in the module. Read the following before handling electronic parts. Power Service Check Action Power Supply Disconnect J11 from the system board and check the following voltages on the power supply cable To print the manual completely, please, download it. Remove the screw from the maintenance station assembly, lift up the right side of the mid frame assembly and slide the maintenance station assembly forward, out of the printer.

Gently pry the two idler gears from the left side frame. When working on the printer, always unplug the printer from the wall outlet. High voltage is present in the power supply as long as it is plugged into the wall outlet.