LIFEVIEW BT878A DRIVER

These cards are software driven components in that they rely on the computer processor to handle much of the load, unlike the Hauppauge PVR series of hardware encoders. The order is probably the PCI card order and should not change between boot ups. Many of these cards also provide audio capabilities supported by the btaudio drivers. Views Read View source View history. Check that the bttv module is correctly auto detecting your card and tuner type. The biggest problem is that the tea chip can’t auto detect itsself, and the module cannot distinguish between the tda and tda, so they must be setup manually. Before running the installer, you must have installed the old drivers of your card, or have listed the Video Capture card in Device Manager under Other Devices..

Uploader: Dakus
Date Added: 12 May 2011
File Size: 26.91 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 7266
Price: Free* [*Free Regsitration Required]

This page was last modified on 28 Octoberat Now, the Main installation screen will be displayed, anddepending on your settings, the driver could be properly configured for your card.

These cards are sold by many OEMs too. Model got re-used, some model no. Agree to the license and press “Next”. Liveview running the installer, you must have installed the old drivers of your card, or have listed the Video Capture card in Device Manager under Other Devices.

Brook Tree is the manufacturer of the bttv “family” of video capture chipsets. A yellow question mark. There are 3 checkboxes to check; the first one askes if there is a TDA on board.

Bttv driver za tv kartice

More detailed information on the module options can be found at: At a command promt type dmesgthe lines you are looking for look like. Make sure you select the TV card model that is right for your capture board if you are asked to just read the screenand select the right TV tuner.

  FEDORA 17 B43 DRIVER

This is important, because the wrong tuner type will probably make TV channel tuning impossible. The Lifeview website has even more names: The installation screen shows. Normally, you must check this if you were told your card was able to tune FM radio. So, the driver will try to autodetect the card bf878a. You must be aware that on FlyVideo, AverMedia, Miro, PinnacleVoodoo and Hauppauge models, tuner model lifdview autodetected, so, with those cards, you could let the driver autodetect it.

Bttv driver za tv kartice – Ubuntu-hr

The biggest problem is that the tea chip can’t auto detect itsself, and the module cannot distinguish between the b8t78a and tda, so they must be setup manually.

If you don’t know the TV tuner model, you will have to try until you find one of them that works with your card if it does not work, you won’t be able to switch TV channels.

This is caused probably because your video capture card does not provide a reliable way to identify it all the older Bt based cards have this problem, but nearly all new Bt based cards should be autodetected. If it says you must pick a card model, you must do so.

Most of the discussion on this page handles about the BT based cards. For all the other capture cards you need to specify the lifeviee tuner.

  MSI MS 7507 DRIVER

Bttv – MythTV Official Wiki

These cards are software driven components in that they rely on the computer processor to handle much of the load, unlike the Hauppauge PVR series of hardware encoders. As said, lifevview must also pick the Tuner model. Check that the bttv module is correctly auto detecting your card and tuner type.

Also make sure that you have the capture card connected to the audio card using a CD audio cable. If it displays a card name at the botton of the dialog, above the “Next” button, you can use the card ilfeview model setting.

PixelView BT878 card – useful in Windows 7?

The licence agreement will be displayed. Do you have very poor color, very low volume and or channels off by one or more channels?

Navigation menu Bt878x tools Log in. The driver knows about those special cards that need special parameters to work because they can tune Radio, but using another specific tuner for that function. Select Install option, then press the “Next” button.

Some cards have different names, but are the same cards, so, check if yours is one of those cards:. I suggest thatin this case, you select a Phillips model based on the videonorm of your country. This driver supports both the BT based cards as the older BT based cards.